Check if the ear speaker is now working perfectly after this step. Check if there is any liquid inside the jack. A little spill of liquid into the jack can give the system a piece of false information, thereby causing the headphone jack not to work. In that case, you have to clean the jack using a soft tissue paper gently. If they're not, press and hold the power button until they turn off. Once they're off, press and hold the power button for about 10 seconds. This will put your earbuds into "pairing mode." Next, open the settings menu on your phone or other device and look for the "Bluetooth" option. Unplug and reconnect the earbuds. This might fix the issue that causes the crackling. Check the audio cable jack connection on wired earbuds. Gently push it to ensure a proper connection between the audio cable and the device. Clean the device's audio jack. Debris build-up can cause crackling sounds. To begin with, make sure you are using the right devices that can connect to the HMDX JAM wireless. If so, then turn off both devices, wait 15 seconds, turn both back on and make sure that the lights on the HMDX Jam are flashing. Ensure device is showing that it is searching for a host. Also, make sure your other device's Bluetooth is on and is #micways #honormicsolution #honor10litemicways #ifsatech #ifsatechhindhi #ifsatechunlockMobile Phones Repairing and Technical Tips and Tricks 1. Please switch other sources to test it. If switching to other sources is normal, it may be a problem such as Source or App. 2. Please check if there is any dust or foreign matter in the earphone hole. This may cause poor contact. If there is dust or foreign matter, you can try to clean the earphone hole with a clean, soft brush. 3. That the Mobile Phone Speaker. If speaker volume is OK the Check Earpiece / Speaker using a Multimeter. Keep the Multimeter in Buzzer Mode. Value must be 25~35 Ohms. If the Value is NOT between 25~35 Ohms then change the Earpiece / Speaker. If the problem is not solved then Check Circuit Track of Earpiece Section. Do Jumper Wherever required. Open the Sound Effects menu → Adjust the sound for headphones → Turn on and then turn off the function. If the "Headphone Volume Control" function is not available for wireless headphones, the following helped me: connect wired headphones → turn off HI-FI sound. Then repeat the steps described above. rSa9.

honor 10 lite ear speaker not working